EasyStand Review: Bantam, Evolv, Glider, StrapStand, and Zing MPS Compared
Five EasyStand standers go head-to-head so you can find the perfect fit for your mobility needs.
EasyStand makes five distinct standing frame lines, the Bantam, Evolv, Glider, StrapStand, and Zing MPS, each engineered for a different clinical profile, with support packages ranging from Minimum to Maximum that determine which positioning components ship with the frame and cannot be substituted after ordering.
- Line Choice Before Package: Pick the right EasyStand line for the diagnosis and body size first, then decide on the support package, because no package upgrade fixes the wrong frame for the clinical need.
- Choosing a minimum support package to save money only makes sense when the user has real trunk stability, otherwise the standing session loses most of its physiological benefit.
- For children who cannot tolerate upright positioning immediately, the Bantam's ability to start in a reclined angle and progress upward is something simpler pediatric frames do not offer.
- Glider Is a Different Category: The Glider is not a static stander with extras, it provides reciprocal lower-body motion during the standing session, which puts it in a distinct clinical niche from every other frame in the range.
- Support Package Premium: 2,000 to 2,800: Across the EasyStand range, stepping from minimum to maximum support within the same size consistently adds roughly 2,000 to 2,800 dollars and brings a substantial set of positioning hardware with it.
Where to start
EasyStand Glider Active Standing Frame Moderate Support Package Medium
EasyStand Glider Active Standing Frame Moderate Support Package Large
What EasyStand Actually Makes and Why the Range Matters
EasyStand has built a focused product line around one clinical problem: getting people with significant mobility impairments into a supported upright position safely, repeatably, and with enough anatomical precision that the standing session delivers real physiological benefit. The brand does not make walkers, wheelchairs, or general rehabilitation equipment. Everything they manufacture is a standing frame, and that narrow focus shows in the engineering.
The catalogue divides into five distinct lines: the Bantam (a pediatric sit-to-stand and supine frame), the Evolv (the modular adult workhorse), the Glider (an active standing frame with reciprocal lower-limb motion), the StrapStand (a strap-style frame for users who need a different load path), and the Zing MPS (a multi-position unit that moves from supine to prone in a single motion). Each line addresses a different clinical profile. None of them is simply a cheaper or more expensive version of another. A clinician who recommends the wrong line is not just overspending, they are mismatching the support architecture to the user's presentation.
Within each line, EasyStand layers support packages ranging from Minimum through Moderate to Maximum. Those tiers determine which positioning components ship with the frame, and since most components cannot be substituted after the fact, the package choice made at ordering is effectively a clinical decision about what the user needs on day one. Understanding the tiers matters before looking at any specific model number.
Support Levels Explained: Minimum, Moderate, and Maximum
EasyStand's tiered packaging is not purely a pricing ladder. Each tier reflects a clinical assumption about how much postural support the user requires to stand safely and therapeutically. The research on prolonged assisted standing, including work on spasticity reduction, bone mineral density maintenance, and bowel and bladder function, generally assumes the user is adequately supported throughout the session. Under-supporting a user to save on the package price undermines the intervention entirely.
Minimum support packages suit users who have reasonable trunk stability and need the frame primarily as a mechanical assist for the sit-to-stand transition and weight-bearing. These packages typically include the core actuator, basic knee support, and foot straps. For a detailed breakdown of what falls into each tier and which clinical presentations map to them, the support level taxonomy is worth reviewing before writing a specification with your team.
Moderate support adds hip supports, chest strapping, and positioning belts. It is the appropriate starting point for most users with incomplete spinal cord injuries, moderate spasticity, or early-stage neurological conditions. Maximum support goes further with lateral trunk supports, head support, chest vests, and additional foot and knee positioning hardware. Users with complete thoracic or cervical injuries, severe hypotonia, or complex postural presentations typically need the maximum tier.
The EasyStand Bantam: Pediatric Sit-to-Stand and Supine in One Frame
The Bantam is EasyStand's pediatric offering and one of the more clinically versatile products in the range. Unlike frames that only support the user upright, the Bantam can be used both as a sit-to-stand stander and as a supine stander, meaning a therapist can start a child in a reclined position and gradually increase the angle as tolerance improves. EasyStand states that no other stander provides the amount of positioning that is possible with the Bantam, and the claim holds when you look at what the maximum support package includes.
The Bantam is available in Extra Small, Small, and Medium sizes, with support packages at both Minimum and Maximum levels. Pricing ranges from $4,858.50 for the Extra Small Minimum package up to $7,694.88 for the Medium Maximum. The difference between minimum and maximum within the same size runs roughly $2,800 to $2,900, reflecting the significant hardware added in the maximum tier.
For pediatric users with cerebral palsy, spina bifida, or other conditions that affect standing tolerance, the supine loading option matters. Starting a child fully upright can trigger autonomic responses or orthostatic intolerance; the ability to begin nearly flat and slowly tilt toward vertical, while maintaining full postural support, makes progressive loading clinically practical. Therapists working with children with cerebral palsy often use this progression protocol over weeks or months.
Bantam Size and Package Comparison
| Model | Support Package | Size | Price |
|---|---|---|---|
 EasyStand Bantam Sit-to-Stand & Supine Standing Frame Minimum Support Package Extra Small |
Minimum | Extra Small | $4,858.50 |
 EasyStand Bantam Sit-to-Stand & Supine Standing Frame Minimum Support Package Small |
Minimum | Small | $4,905.24 |
 EasyStand Bantam Sit-to-Stand & Supine Standing Frame Minimum Support Package Medium |
Minimum | Medium | $5,894.16 |
 EasyStand Bantam Sit-to-Stand & Supine Standing Frame Maximum Support Package Extra Small |
Maximum | Extra Small | $6,927.36 |
 EasyStand Bantam Sit-to-Stand & Supine Standing Frame Maximum Support Package Small |
Maximum | Small | $6,974.10 |
 EasyStand Bantam Sit-to-Stand & Supine Standing Frame Maximum Support Package Medium |
Maximum | Medium | $7,694.88 |
Size selection for the Bantam is driven by the child's height and weight, not age. Growth across pediatric populations varies considerably, and a child with significant hypotonia or spasticity may not follow typical height-weight curves. Confirming the current measurements against EasyStand's sizing charts before ordering is essential, particularly for the seat depth range, since that measurement determines whether the frame correctly offloads through the hips and knees or creates pressure points.
The EasyStand Evolv: Modular Design for Complex Adult Presentations
The Evolv is EasyStand's flagship adult frame and the product most clinicians encounter first. The defining feature is modularity: EasyStand's own documentation describes over 60 support and positioning components that can be configured onto the base unit. The base frame is functional for many users independently, but the packaging system means that a clinician can specify exactly the hardware a user needs without buying a fixed assembly that includes irrelevant components.
The Evolv comes in standard and XT (Extra Tall) sizes. The XT fits users from 6 feet to 6 feet 10 inches tall, with a weight capacity of 350 lbs and a seat depth range of 19 to 24 inches from the seat pivot. The seat height is 23.5 inches. The frame weighs 112 lbs and comes in charcoal with black upholstery. For tall users with spinal cord injuries, multiple sclerosis, or post-stroke presentations, the XT addresses a population that is genuinely underserved by most stander manufacturers.
The Maximum Support Package XT ($9,584.16) ships with a substantial hardware set: Easy-Adjust Seat Depth, Adjustable/Removable Actuator Handle, Front Swivel Casters, Shadow Tray, Large Contoured Chest Pad, Secure Foot Straps, Hip Supports, Independent Knee Pads, Removable Contoured Back, Velcro Positioning Belt, Accessories Mounting Bracket, Chest Vest, High Mount Chest Vest Bracket, Lateral Supports, Head Support, Multi-Adjustable Foot Plates, Planar Seat, and 5-inch Rear Locking Casters. For a user with a complete cervical or upper thoracic injury, that list represents what is genuinely necessary, not upselling. Users managing spinal cord injury recovery at this level of injury typically require every item on that list from the first session.
The Minimum Mobile Support Package XT ($8,865.02) is a meaningfully different configuration. The key difference is the actuator: this package uses a Manual Hydraulic Actuator with Handle rather than the electric actuator in the maximum package. It also replaces the contoured back with a removable flat back and omits lateral supports, head support, and the chest vest. The mobile configuration adds a Clear Angle Adjustable Tray, and the entire package is oriented toward users who have more trunk control and can manage the sit-to-stand transfer with less postural scaffolding. For settings where caregiver capacity is limited, the manual hydraulic actuator is also a practical consideration.
The EasyStand Glider: Active Standing as a Distinct Therapeutic Category
The Glider is categorically different from every other EasyStand product. Where the Bantam, Evolv, StrapStand, and Zing MPS are all static standing frames, the Glider introduces reciprocal lower-body movement during the standing session.
EasyStand describes the Glider's technology as "active standing" and states it is found in no other stander. The mechanism provides lower body range of motion, specifically a gliding reciprocal leg motion, while the user is in a supported upright position. Simultaneously, the actuator handle and glide handle extensions allow upper body strengthening work. This moves the Glider into a different clinical niche: it is not just maintaining bone density and managing spasticity through weight-bearing, it is providing active exercise within the standing session.
The Glider comes in Medium and Large sizes. The Medium fits users from 4 feet to 5 feet 6 inches, up to 200 lbs, with a seat depth range of 20 to 25 inches and a seat height of 21.5 inches. The unit weighs 175 lbs. The Large fits users from 5 feet to 6 feet 2 inches, up to 280 lbs, with a seat depth range of 24 to 29 inches at the same seat height. Both are available with the Moderate Support Package, priced at $9,813.76 for the Medium and $9,650.58 for the Large.
The Moderate package for the Medium includes Glide Handle Extensions and Adjustable Resistance Cylinders, which are the components that make the active motion possible and adjustable in intensity. The resistance cylinders allow the clinician or user to dial in appropriate loading for the reciprocal leg movement, making the Glider genuinely programmable as a therapeutic exercise tool rather than a fixed-resistance device. For users with incomplete spinal cord injuries, multiple sclerosis with residual motor function, or post-stroke hemiplegia with some volitional lower extremity movement, the Glider offers therapeutic value that a static frame simply cannot deliver.
The clinical research on passive versus active standing generally supports the additional benefits of active lower limb movement during standing sessions, including improved circulation, potential for partial weight-bearing gait patterning, and increased cardiovascular demand. The Glider is the only EasyStand product positioned to deliver those outcomes. Clinicians considering whether a static frame is sufficient for their patient's goals should specifically evaluate whether the active component is clinically indicated before defaulting to the Evolv or a comparable static model.
The StrapStand and Zing MPS: Niche Frames for Specific Clinical Needs
The StrapStand uses a strap-style loading mechanism rather than the knee pad and hip support architecture found in the rest of the EasyStand range. The clinical application for strap-style standers typically involves users where traditional knee block positioning is not appropriate, either due to fixed contractures, specific pressure management requirements, or anatomical factors that make anterior knee loading problematic. The strap design distributes the load differently, and for the right user it is a better fit than a more conventional sit-to-stand frame. Peak Primal Wellness carries the Maximum Support Package for the StrapStand.
The Zing MPS (Multi-Position Stander) is the most mechanically capable product in the EasyStand range. It pivots in two directions, moving from flat supine to 20 degrees prone in a single motion. The Zing MPS TT variant extends this to 30 degrees of prone positioning and adds up to 30 degrees of independent leg abduction, along with an available swing-away tray. This level of positional range is clinically significant for users with significant contracture risk, those who benefit from prone positioning for trunk extension, or situations where varying the load angle throughout a session is part of the therapeutic protocol. For users managing multiple sclerosis, where fatigue management and positional tolerance both matter, the ability to vary position within a single device reduces the handling burden on caregivers considerably.
Both the StrapStand and Zing MPS are specialist products. Most users do not need them, but when the clinical picture points to their specific capabilities, there is genuinely no substitute within the EasyStand range or outside it.
Matching the Right EasyStand Line to the Clinical Presentation
The clearest way to navigate the EasyStand range is by starting with the user's primary diagnosis and functional status, then narrowing by body size, and finally deciding on the support package. The line choice comes before the package choice.
- Pediatric users with any diagnosis that requires supported standing: start with the Bantam. The supine loading option is uniquely important for children who cannot tolerate upright positioning immediately, and the size range covers the majority of pediatric patients.
- Adult users who need a static sit-to-stand frame and have standard height: the Evolv standard size covers 4 feet to 6 feet with varying seat depths. Its modularity means the frame can be reconfigured if the user's support needs change.
- Adult users between 6 feet and 6 feet 10 inches: the Evolv XT is the only EasyStand product in this height range with both minimum and maximum support options.
- Users with residual motor function in the lower extremities who could benefit from active exercise during standing: the Glider, specifically with the Moderate Support Package, is clinically indicated over a static frame.
- Users where anterior knee loading is contraindicated, or where strap-style positioning is preferred: the StrapStand.
- Users who benefit from supine-to-prone positioning, prone loading at angles beyond what the Bantam provides, or leg abduction during standing: the Zing MPS or Zing MPS TT.
For clinicians working in physical therapy settings, the Evolv's modularity makes it the most common institutional choice because it can be adjusted to serve different patients over time. For home use, the Glider's active component often makes it more engaging for users who will be using the frame independently or with minimal caregiver assistance over the long term. The evidence on standing frame adherence consistently identifies boredom and perceived futility as dropout factors, and the Glider addresses both by making the standing session an active exercise rather than a static one. A broader look at what the research documents about standing frames generally provides useful context before committing to a specific line.
Pricing, Value, and What You Are Actually Buying
EasyStand frames range from $4,858.50 for a pediatric minimum-support configuration to over $9,800 for the Glider Medium Moderate package. That range is wide enough that price alone tells you very little. The more useful frame is cost per clinical outcome: a Bantam minimum package at $4,858.50 is not "cheaper" than a Glider at $9,813.76 if the user actually needs active standing and the Bantam delivers none of it.
The support package premium is also consistent across the range. Moving from minimum to maximum within a size adds roughly $2,000 to $2,800 depending on the line. That increment buys a substantial hardware set, including components like lateral trunk supports, head support, chest vests, and contoured backs that are clinically necessary for some users and genuinely redundant for others. Ordering the wrong package in either direction is a real cost, which is why the clinical assessment drives the specification rather than the other way around.
Browsing the full standing frames collection at Peak Primal Wellness gives a clear view of where each EasyStand model sits relative to the overall range available, and comparing across the EasyStand lineup specifically allows side-by-side evaluation of every size and package option. Insurance funding pathways, including Medicaid waiver programs and some private insurance policies, often cover standing frames when prescribed by a physician as medically necessary. The clinical documentation required for funding typically needs to reference specific functional limitations and anticipated therapeutic goals, which is another reason the line choice and support package selection should happen in consultation with the prescribing clinician before the order is placed.
Build Quality, Durability, and Long-Term Ownership
EasyStand frames are medical devices, not consumer products, and they are built to that standard. The steel frames, locking casters, and component hardware are designed for repeated daily use across multi-year ownership periods. The Evolv XT carries a 350 lb weight capacity with a 112 lb frame weight, which reflects robust construction. The Glider at 175 lbs is heavier than any other EasyStand model, partly because of the additional mechanical components required for the active gliding motion.
Upholstery and contact surfaces are designed for hygiene and durability in clinical use, including the wipe-down requirements of most healthcare settings. The adjustability built into the frames, particularly the Easy-Adjust Seat Depth found across most of the range, means that minor changes in the user's body composition or postural needs over time can be accommodated without replacing major components.
Maintenance requirements for EasyStand frames are low relative to powered rehabilitation equipment. The primary consumables are upholstery and contact pads, which wear with use. The manual hydraulic actuators found in some configurations require periodic inspection to confirm fluid integrity, but EasyStand does not publish a specific maintenance interval in their documentation. For electric actuator versions, standard powered-device precautions apply, including keeping components dry and inspecting cables and connectors periodically.
How EasyStand Compares to Other Standing Frame Manufacturers
EasyStand's competitive position rests on three things: the Glider's active standing technology (genuinely unique to the brand), the Evolv's modular component system (broader than most comparable products), and the Zing MPS's multi-directional positioning (supine to prone in one motion is not a widely replicated feature). Users comparing static sit-to-stand frames from other manufacturers will find similar core functionality but typically less positional precision and fewer customization options than the Evolv's 60-plus component library.
For pediatric applications, the Bantam's supine loading capability combined with its maximum support component set puts it ahead of simpler pediatric standers that only support upright positioning. A child with spina bifida who cannot yet tolerate full upright loading benefits specifically from the Bantam's angular progression capability, something a basic upright pediatric frame cannot offer. Similarly, clinicians managing post-stroke recovery often find that the Evolv's adjustability accommodates the changing functional picture during the recovery arc better than frames with fixed support geometries. The evidence on early supported standing after stroke, including its effects on lower-limb spasticity and cardiovascular deconditioning, makes frame adjustability particularly relevant for users whose needs shift month to month. More on how the framing choice interacts with post-stroke rehabilitation goals is covered in the discussion of standing frames in stroke recovery.
The honest limitation of the EasyStand range is price. None of these products are inexpensive, and the minimum support Bantam at the entry price point still represents a significant investment for families paying out of pocket. Clinicians working with patients who are self-funding should build the insurance and funding conversation early, well before the product recommendation is made. The clinical case for standing frames in most neurological conditions is well-supported in the literature, and that documentation is the foundation of most successful funding applications.
More standing frames worth a look
EasyStand Evolv Sit-to-Stand Standing Frame Maximum Support Package XT
EasyStand Evolv Sit-to-Stand Standing Frame Minimum Mobile Support Package XT
Frequently asked questions
Who is EasyStand equipment actually designed for?▾
EasyStand builds exclusively for people with significant mobility impairments who need supported upright positioning, not for general rehabilitation or fitness use. Their frames are used by individuals with spinal cord injuries, cerebral palsy, spina bifida, and similar conditions affecting trunk and lower-limb control. If someone can stand with minimal assistance or a simple grab bar, a standing frame at this level of engineering is probably more than they need.
Is it safe to order a lower support package to save money and upgrade later?▾
EasyStand specifies no substitutions on their packages, which means the components that ship with the frame are fixed at the time of order and cannot simply be swapped out later by adding one part. Ordering a minimum package for a user who genuinely needs maximum support does not just waste money, it creates a clinical risk by leaving that person under-supported during standing sessions. The standing research supporting benefits like spasticity reduction and bone density maintenance assumes the user is properly supported throughout.
What does a standing frame at this price level actually cost?▾
The EasyStand models on this page range from $4,858.50 for the Bantam Extra Small Minimum package up to $9,813.76 for the Glider Medium Moderate Support package. The Evolv XT in Maximum Support sits at $9,584.16, while the Minimum Mobile Support version of the same frame comes in at $8,865.02. The price difference between support tiers within a single size typically runs several hundred to nearly three thousand dollars depending on the model.
How does the Glider differ from the Evolv, and who should consider each?▾
The Glider is an active standing frame that adds reciprocal lower-limb motion and upper body strengthening during the standing session, which EasyStand describes as active standing technology found in no other stander. The Evolv is a modular sit-to-stand frame with over 60 positioning components, designed to accommodate a very wide range of postural presentations through component selection. If the clinical goal is weight-bearing with dynamic movement, the Glider is the relevant frame; if the priority is precise, highly customized postural support at rest, the Evolv is the more flexible platform.
What is the right way to size an EasyStand frame?▾
Sizing is based on the user's height and weight, not on general category or age. The Glider Medium fits individuals from 4 ft to 5 ft 6 in tall and up to 200 lbs, while the Large fits 5 ft to 6 ft 2 in at up to 280 lbs. The Evolv XT is built for taller users, fitting 6 ft to 6 ft 10 in at up to 350 lbs, with a seat depth range of 19 to 24 in. Seat depth in particular is worth confirming carefully, since it is set from the seat pivot and directly affects hip and pelvic positioning during the transfer.
What does setup and assembly look like for a frame this complex?▾
These are fully engineered medical-grade devices, not flat-pack furniture, and arriving with the right positioning components already specified saves significant adjustment time. The Evolv XT weighs 112 lbs and the Glider Medium weighs 175 lbs, so neither is trivially moved into position. Most clinical and home setups benefit from a therapist being present for initial positioning, since adjustments to seat depth, knee pads, chest supports, and foot plates all interact with each other and need to match the user's specific measurements.
What ongoing costs should buyers account for beyond the purchase price?▾
EasyStand does not publish maintenance schedules or consumable costs in the product listings, so specific figures are not available. In practice, upholstery and padding components on high-use frames do wear over time, and replacement parts for modular systems like the Evolv are generally available through the manufacturer. Clinical settings should also factor in the cost of periodic therapist review to confirm the frame still fits the user, particularly for pediatric models like the Bantam where growth changes positioning requirements.
What is the most common mistake buyers make when choosing between these models?▾
Matching the frame to the diagnosis rather than the actual postural presentation is probably the most frequent error. Two people with the same spinal cord injury level can have very different trunk control and spasticity patterns, and the right support tier depends on that individual assessment rather than a diagnostic category. Ordering the minimum package to keep costs down for a user who genuinely needs lateral supports and head positioning means the frame will not deliver the clinical outcomes that justified the purchase in the first place.
Shop standing frames
Quality inspected before shipping, with expert US-based phone support before and after purchase.
