Wall Mount Installation Guide
1:
Select mounting location
2:
Mark 6 ft from ground (marks the bottom left corner)
3:
From mark 1, make another mark 15 inches above. (Use a level to make sure your line is straight)
4:
Measure from mark 1 (left bottom corner), 45 inches to the right to get your lower right corner
5:
Repeat step 3 for the second mark 15 inches above your lower. Using a level for accuracy
6:
Drill a pilot hole in the center at each mark
7:
Insert bolt through mounting hole and thread drywall anchor open to mounting bracket
8:
Push anchors through your drilled holes with the mount arm attached
9:
Level and tighten your bolts securing the mounting arms to the wall
10:
Place slip arms on the rebounding system. NOTE: Be sure to have all wing bolts loose
11:
Get assistance lifting the rebounder to slide the arms into the mounts on the wall
12:
Tighten wing bolts to the desired position
13:
Enjoy the All Ball Pro Wall Mount System