Chattanooga Triton Traction Review: DTS Units and Hi-Lo Tables
Discover how Chattanooga's Triton DTS units and Hi-Lo tables deliver precision, comfort, and clinical versatility for modern traction therapy.
Chattanooga Triton pairs six-section Hi-Lo tables with a programmable traction unit to deliver controlled spinal distraction. The 6E ($14,043.14) is fully electric; the 6M ($9,408.91) uses hybrid gas-spring and electric drive. Both tables measure 90.5" x 37", lift 440 lbs., and require the traction unit purchased separately.
- 6E vs. 6M: head section range: Both tables share the same footprint and 440 lb capacity, but the 6E's head section reaches 30 degrees of negative elevation versus 15 on the 6M, which matters for certain cervical and positional protocols.
- The traction unit runs static, intermittent, and cyclic protocols, and switching between them within a patient's plan is a real clinical tool, not just a spec sheet item.
- Basic vs. Advanced: 682 dollars apart: The Advanced Accessory Package adds cervical traction and biofeedback capability for roughly 682 dollars more, so the right choice depends on whether the clinic treats cervical cases regularly.
- Complete system: 15,959 to 21,275: A table paired with a traction unit package runs from about 15,959 dollars for the 6M with Basic to just over 21,275 for the 6E with Advanced, both figures covering commercial-grade programmable equipment.
- The Triton's investment only makes sense where spinal traction is a regular part of the schedule; clinics using it occasionally will find the infrastructure hard to justify.
Where to start

Chattanooga Triton 6E DTS, Hi-Lo Traction Table, 90.5" x 37" x 31"

Chattanooga Triton 6M DTS, Hi-Lo Traction Table, 90.5" x 37" x 31"
What the Chattanooga Triton Line Actually Is
The Chattanooga Triton is not a single product but a tightly integrated system built around one clinical purpose: controlled spinal distraction. The line pairs six-section Hi-Lo tables with programmable traction units, and the two halves are designed to work together. Buying a table without a traction unit gives you a sophisticated treatment surface; pairing it with the Triton traction unit gives you a full decompression protocol.
Chattanooga has been manufacturing rehabilitation equipment for decades, and the Triton represents the current top of their traction portfolio. The brand is well established in physiotherapy clinics, chiropractic offices, and hospital outpatient departments. Practitioners looking into this system are usually comparing it against older, simpler tables or against the entry-level Galaxy TTET series that Chattanooga also makes. The Triton sits clearly above both in capability and price.
Peak Primal Wellness carries the full Triton lineup as an authorized Chattanooga dealer, which means the specifications here come directly from manufacturer documentation rather than third-party summaries. If you are evaluating this system for a clinic build-out or an upgrade, what follows covers the real differences between models, what the accessory packages add, and where each configuration makes clinical and financial sense.
Triton 6E vs. 6M: The Table Decision That Matters Most

Both the Triton 6E and 6M share the same footprint: 90.5 inches by 37 inches, with a height range of 19 to 37 inches and a maximum patient weight capacity of 440 lbs. In terms of table dimensions and load capacity, they are identical. The meaningful differences come down to how each table moves.
The 6E is fully electric. All six sections are each driven by a dedicated electric actuator, so positioning is frictionless and controlled entirely from the hand remote. The head section travels from -30 degrees to +40 degrees, and the pelvic section inclines to 20 degrees. That wider head section range, specifically the additional 15 degrees of negative elevation compared to the 6M, is a real clinical advantage for prone cervical positioning. The lockable hand remote keeps the controls intuitive and safe. At $14,043.14, the 6E is the premium choice for high-volume clinics where speed and repeatability of positioning directly affect throughput.
The 6M uses a hybrid approach, combining gas springs with electric power to assist manual adjustment. Height is controlled via a foot and hand controller, and it lifts the same 440 lbs. across the same height range. The head section here moves from -15 degrees to +40 degrees, and the pelvic section tops out at 15 degrees of inclination rather than 20. The leg section on both models goes to 45 degrees. At $9,408.91, the 6M delivers nearly the same clinical versatility for roughly $4,600 less. Clinics with lighter scheduling loads or tighter capital budgets will find it more than adequate.
Both tables include a face hole with a removable cover for prone positioning, tuck-away grab bars for hanging traction without thoracic restraint, and four retractable feet with casters for repositioning patients or moving the table between rooms. The 6E uses a sturdy lockable caster system; the 6M uses multidirectional wheels. Upholstery options differ slightly: the 6E offers four colors (blue, black, graphite gray, and black/ecru), while the 6M offers six (Imperial Blue, Black, Burgundy, Midnight Gray, Dove, and Stone Blue).
The Triton Traction Unit: What It Actually Does

The traction unit is the clinical core of the system. It controls pull force, pull pattern, hold and rest times, and patient monitoring through a digital touchscreen that rotates 270 degrees so the interface is accessible regardless of how the unit is positioned relative to the table. The three programmable pull patterns are static, intermittent, and cyclic traction. Each serves a different therapeutic purpose, and the ability to switch between them within a patient's protocol is a genuine clinical tool rather than a marketing feature.
The mechanism of action is mechanical decompression: the unit creates distraction force across targeted spinal segments, reducing intradiscal pressure, mobilizing facet joints, and stretching paraspinal musculature. Research on lumbar traction consistently documents reductions in nerve root compression symptoms, particularly in patients with confirmed disc herniation or foraminal stenosis. Cyclic traction in particular has been studied for its ability to create rhythmic pressure changes that may improve nutrient exchange in avascular disc tissue. The Triton's programmable hold and rest parameters allow practitioners to replicate those studied protocols precisely.
The Patient Pain Profile system is a feature worth noting for clinical documentation. The unit records pain assessments before and after each session, and Patient Data Cards store those parameters across multiple visits so clinicians can review trends and adjust protocols over time. Up to twenty user-defined protocols can be stored, which is practical in a multi-practitioner setting where different clinicians have established their own preferred progressions.
An emergency patient interrupt switch is standard on the unit, allowing patients to immediately halt treatment and shut down the traction force. For practitioners working with acute or sensitized patients, that safety mechanism matters. The contraindications that apply to any spinal traction system apply here equally: osteoporosis, spinal instability, active malignancy, and pregnancy are all situations where mechanical traction is not appropriate regardless of how sophisticated the unit is.
Basic vs. Advanced Accessory Packages: What Changes

Chattanooga bundles the Triton traction unit with two accessory configurations, and the choice between them is less obvious than the price difference suggests.
The Basic Accessory Package ($6,550.54) includes the Triton Traction Unit, the QuickWrap DTS Belt Set, and a Knee Bolster Set. The QuickWrap offers universal fit for pelvic and lumbar traction applications up to 300 lbs., and the knee bolsters are designed to eliminate the need for a separate flexion stool by maintaining appropriate lumbar positioning during treatment. That is a functional, complete lumbar traction setup for a clinic seeing primarily low back patients.
The Advanced Accessory Package ($7,232.80) adds two significant items: the Saunders Cervical Traction Set and the Stabilizer Pressure Biofeedback Unit. The Saunders cervical attachment extends the system's reach to the cervical spine, which transforms the setup from a lumbar-only tool into a full-spine decompression system. The Stabilizer Pressure Biofeedback Unit monitors how the patient's body responds to treatment in real time, combining a gauge, inflation bulb, and pressure cell to give the clinician objective data on positioning and muscle recruitment during traction. For clinics treating a mixed caseload of lumbar and cervical complaints, the $682.26 difference between packages buys meaningful capability.
A key practical note: neither package is a table. Both are designed specifically for use with the Triton 6M or 6E tables, and the traction unit does not function as a standalone treatment device without the appropriate table. Clinics upgrading an existing table setup should verify compatibility before purchasing a package alone. The DTS designation on Chattanooga's product line signals that the table and unit are engineered to work together as a decompression system, not just coexist in the same room.
Triton System at a Glance: Comparing the Lineup

The table below covers the core Triton system components alongside the entry-level Galaxy table to give a sense of how the line scales. Prices are as listed by the manufacturer.
| Model | Type | Table Size | Weight Capacity | Price |
|---|---|---|---|---|
Chattanooga Triton 6E DTS, Hi-Lo Traction Table |
6-section, fully electric | 90.5" x 37" | 440 lbs. | $14,043.14 |
Chattanooga Triton 6M DTS, Hi-Lo Traction Table |
6-section, gas spring + electric | 90.5" x 37" | 440 lbs. | $9,408.91 |
Chattanooga Triton DTS Traction Unit with Advanced Accessory Package |
Traction unit + cervical + biofeedback | Table sold separately | Not published | $7,232.80 |
Chattanooga Triton DTS Traction Unit with Basic Accessory Package |
Traction unit + lumbar belts | Table sold separately | Up to 300 lbs. (belt limit) | $6,550.54 |
Chattanooga Triton Clinical Traction Unit |
Traction unit only | Table sold separately | Not published | $5,458.85 |
Chattanooga Galaxy TTET300, 3 Section Hi-Lo Traction Table |
3-section, Hi-Lo | 86.6" x 33.5" | Not published | $6,169.95 |
The Galaxy TTET300 sits outside the Triton line but is worth including here because it represents the decision point for many buyers. Its three-section design and smaller footprint (86.6 by 33.5 inches) suit smaller treatment rooms, but it lacks the multi-section positioning flexibility of the Triton tables. Clinics with space constraints or lighter traction volumes may find the Galaxy a sensible starting point, knowing that the upgrade path to the Triton exists within the same brand ecosystem.
Clinical Applications and Who Benefits

The Triton system is indicated primarily for lumbar and cervical radiculopathy, disc herniation, degenerative disc disease, and facet syndrome. These are the conditions where mechanical traction has the strongest evidence base. Research generally supports traction as part of a multimodal approach rather than a standalone treatment, and the Triton's programmable protocols fit naturally into a broader treatment plan that might include manual therapy, exercise, and pain neuroscience education.
For clinics treating significant volumes of pelvic traction cases, the QuickWrap belt system included in both accessory packages is an immediate practical asset. The universal fit reduces the need for multiple belt sets, and the 300 lb. application limit covers the majority of clinical populations. The knee bolster set, included in both packages, is particularly useful for patients who cannot comfortably tolerate full lumbar flexion on a flat surface.
Cervical cases are handled through the Saunders Cervical Traction Set included in the Advanced package. Cervical traction device selection matters because the forces involved are much lower than in lumbar traction, and patient positioning is more sensitive. The Saunders system within the Triton ecosystem handles this well by integrating with the same traction unit, so practitioners use a single interface for both spine regions rather than maintaining separate devices.
The biofeedback unit in the Advanced package adds a layer of objective monitoring that is genuinely useful in clinical practice. Tracking pressure changes during traction helps confirm that positioning is correct and that the patient is not guarding against the treatment, which is a common barrier to effective decompression in anxious or pain-sensitized patients.
Build Quality and Practical Durability
Both Triton tables are built around a sturdy steel frame. The 6E's six independent actuators represent more mechanical complexity than the 6M's hybrid gas-spring arrangement, which is worth factoring into long-term maintenance thinking. More actuators means more serviceable components, but it also means more precise and consistent section movement. In a high-volume clinic where tables run most of the day, the fully electric system pays for its complexity in time saved per patient transition.
The upholstery across the Triton line is designed for clinical environments, with a surface that tolerates standard disinfection protocols. The face hole cover on both tables is removable, which simplifies hygiene management in prone traction or manual therapy positions. Caster and wheel systems on both models are built for practical mobility rather than frequent repositioning; the retractable feet on the 6E lock the table firmly once placed.
The traction unit's 270-degree rotating touchscreen is a small detail that makes a real difference in practice. Treatment rooms are not always configured to give the clinician ideal access on one side of the table, and being able to reposition the interface without moving the unit is a genuine workflow improvement. The digital touchscreen itself is straightforward to navigate, which matters in a busy clinic where staff may be transitioning between patients quickly.
Pricing and Value for Clinics
A complete Triton system, meaning a table plus a traction unit package, represents a significant capital outlay. The 6M paired with the Basic Accessory Package totals approximately $15,959. The 6E with the Advanced Package comes to just over $21,275. Those figures are worth contextualizing: this is commercial-grade, programmable, six-section traction equipment. Entry-level clinical traction tables with basic mechanical traction units exist at lower price points, but they offer substantially less positioning control, lower weight capacity, and no patient data management.
Clinics that see a reasonable volume of spinal traction patients will find the system cost defensible within a fairly short time horizon. The larger question is usually the 6E versus 6M decision rather than the Triton versus something cheaper decision, since the Triton's clinical depth is difficult to replicate at lower price points within professional-grade equipment.
Practitioners exploring the broader range of traction equipment on the market will find the Triton sits at the top end of clinical table systems, with pricing that reflects both the engineering in the table and the sophistication of the traction unit. For clinics that see lumbar decompression as a core service rather than an occasional add-on, that positioning is appropriate.
If cervical decompression is a meaningful part of your caseload, the Advanced package's Saunders Cervical set extends the system's range significantly. Clinics that treat mostly lumbar cases can start with the Basic package and add cervical capability later, since the traction unit's protocol storage and interface remain the same regardless of which accessories are attached. Practitioners looking more broadly at cervical traction options will find the Saunders attachment within the Advanced package represents a well-designed, carefully engineered approach to upper spine decompression.
Who Should Buy the Chattanooga Triton
The Triton line is built for professional clinical environments. That means physiotherapy clinics, chiropractic practices, sports medicine facilities, and hospital outpatient departments where spinal traction is a regular part of the treatment mix, not an occasional intervention. The six-section table design, programmable pull patterns, and patient data management tools are all clinical infrastructure that justify their cost only when traction is used with enough frequency to make the investment sensible.
Practitioners evaluating the mechanics of lumbar traction equipment will recognize that the Triton's architecture, fully electric or hybrid actuation, programmable distraction with biofeedback, integrated patient records, is genuinely different from simpler inversion or mechanical gravity traction devices. It is not overbuilt for the right clinical context; it is appropriately built for a setting where protocol precision and documentation matter.
If you are running a smaller practice or exploring traction as an adjunct rather than a core service, the Galaxy TTET series is worth considering as an entry point within the same brand family. For home or personal use, the Triton is not the right category at all; those contexts are served by a different class of device entirely, and understanding whether a home traction device suits your situation is a useful preliminary step before looking at clinical-grade systems.
The Triton 6E makes the most sense for high-volume practices where the speed and precision of fully electric positioning translate directly into patient throughput. The 6M is the right call for practices that want the same clinical depth at a lower entry point and can tolerate slightly less range in the head and pelvic sections. Either way, pairing the table with the Advanced Accessory Package is worth the incremental cost for any clinic treating both lumbar and cervical patients regularly. The biofeedback unit alone changes what you can observe and adjust during treatment, and the cervical attachment makes the system complete rather than specialized.
More traction equipment worth a look

Chattanooga Triton DTS Traction Unit with Advanced Accessory Package

Chattanooga Triton DTS Traction Unit with Basic Accessory Package
Frequently asked questions
Who is the Chattanooga Triton system actually designed for?▾
This system is built for licensed practitioners in clinical settings, including physiotherapy clinics, chiropractic offices, and hospital outpatient departments. The manufacturer requires that the traction unit be used only under the prescription and supervision of a licensed practitioner. It is not a consumer or home-use product.
Is the Triton system safe, and what contraindications apply?▾
The traction unit includes an emergency patient interrupt switch that allows the patient to immediately halt treatment and shut off the unit, which is a meaningful safety feature for acute or sensitized patients. That said, mechanical spinal traction is contraindicated for patients with osteoporosis, spinal instability, active malignancy, or pregnancy, regardless of which unit is used. These are clinical judgments that fall on the prescribing practitioner, not the equipment.
What does the full Chattanooga Triton system cost to set up?▾
The Triton 6E Hi-Lo table is priced at $14,043.14 and the 6M at $9,408.91. The traction unit with the Advanced Accessory Package is $7,232.80, and the Basic Accessory Package version is $6,550.54. Neither table includes the traction unit, so a complete system combining a 6M table with the Basic package, for example, comes to roughly $15,959 before any additional accessories.
What is the difference between the 6E and 6M traction tables?▾
Both tables share the same 90.5 in x 37 in footprint, a height range of 19 to 37 inches, and a 440 lb patient capacity. The 6E is fully electric with dedicated actuators on all six sections and a hand remote, while the 6M uses a hybrid of gas springs and electric power with a foot and hand controller. The 6E also offers a wider head section range (-30 to +40 degrees vs. -15 to +40 degrees) and a higher pelvic section inclination (20 degrees vs. 15 degrees), which can matter for certain prone cervical setups.
What does the Advanced Accessory Package include that the Basic does not?▾
The Basic package ($6,550.54) includes the Triton Traction Unit, a QuickWrap DTS Belt Set, and a Knee Bolster Set. The Advanced package ($7,232.80) adds the Saunders Cervical Traction Set and the Stabilizer Pressure Biofeedback Unit, which monitors how the patient's body is responding to treatment in real time. For clinics treating a high proportion of cervical cases or wanting more detailed patient monitoring, the Advanced package is the more complete setup.
How does the Triton traction unit handle patient data and protocol management?▾
The unit records Patient Pain Profiles before and after each session, and Patient Data Cards store those results across multiple visits so clinicians can track trends over time. Up to twenty user-defined protocols can be saved, which is practical in multi-practitioner settings where each clinician has developed preferred progressions. The touchscreen interface also rotates 270 degrees so it can be accessed from virtually any position relative to the table.
How do you size the right table and package combination for a clinic?▾
Volume and case mix are the two deciding factors. High-volume clinics with back-to-back appointments will appreciate the 6E's fully electric, frictionless positioning because it reduces setup time per patient and reduces physical effort for the clinician. Lower-volume clinics or those with tighter budgets will find the 6M more than capable. For the accessory package, clinics treating cervical cases regularly should budget for the Advanced package to include the Saunders Cervical Traction Set rather than adding it later.
What do clinicians most commonly get wrong when buying a traction table system?▾
The most common mistake is budgeting only for the table and overlooking the traction unit entirely. Both the 6E and 6M listings are explicit that the traction unit and cervical traction unit are optional and sold separately, so a clinic that purchases just the table has an expensive treatment surface with no decompression capability. A second mistake is underestimating the QuickWrap DTS Belt Set limitation in the Basic package, which is rated for pelvic and lumbar traction applications up to 300 lbs, which may not suit every patient population.
Shop traction equipment
Quality inspected before shipping, with expert US-based phone support before and after purchase.

