Cervical Traction

For home use, the Saunders Cervical HomeTrac at $743 is the standout choice. It is purpose-built for independent use with clear force calibration and a simple recline setup. Clinicians running a full practice should look at the Chattanooga TX Traction Kit bundles starting at $6,458, which pair the programmable TX Unit with Saunders Cervical components and your choice of treatment stool color.

Chattanooga focuses on the powered traction delivery side, specifically the TX Unit and table integration hardware. Saunders specializes in the harness and patient-interface components, including head halters and the HomeTrac home device. The two brands are designed to work together, which is exactly why the clinical bundles in this collection combine both. If you only need a home solution, Saunders can stand alone effectively.

The Saunders Cervical HomeTrac Home Traction Device at $743 is the most practical pick for home users. It delivers consistent, adjustable force without requiring a traction table, and the setup is straightforward enough that most people can self-apply after a brief orientation from their physical therapist. The $560 Saunders Cervical Traction System is a solid alternative if your provider recommends the TX Clevis attachment configuration.

The saunders cervical traction device line is built around precise, calibrated force delivery. Generic foam or air-bladder alternatives tend to apply uneven or unmeasurable tension. The Saunders approach uses a mechanical system that lets you (or your clinician) dial in a specific pull force, which is important for tracking progress and avoiding overloading the cervical joints.

Cervical traction is commonly used in clinical protocols for disc herniations and nerve root compression, but it should always be directed by a physical therapist or physician first. The Saunders cervical traction units in this collection allow precise force adjustment, which matters a lot when treating disc-related conditions where too much pull too soon can aggravate symptoms.

A cervical traction pillow uses a curved, wedge-shaped foam or inflatable design to create mild passive traction through positioning rather than applied force. It is gentler and less adjustable than a mechanical cervical traction device. The Saunders and Chattanooga products in this collection are mechanical systems, which deliver more controlled, measurable decompression suitable for clinical and home rehab protocols alike.

The brace direct cervical traction collar is a soft inflatable collar device that provides low-level decompression through air pressure. It is consumer-grade and designed for mild relief use. The Saunders and Chattanooga products at Peak Primal Wellness operate at a clinical level, with calibrated mechanical force delivery, structured treatment positioning, and the build quality required for repeated professional use.

Clinical guidelines generally recommend starting cervical traction at around 10 to 15 pounds of force for mild cases, with some protocols going higher under supervised conditions. The specific range your provider programs into the TX Unit or sets on the HomeTrac will depend on your diagnosis, body weight, and symptom response. The TX Traction Unit's programmable interface allows clinicians to set and store these parameters precisely.

The Saunders Cervical HomeTrac and the Saunders Cervical Traction System with TX Clevis Attachment are both designed for use without a dedicated traction table, making them practical for home or space-limited settings. The Chattanooga TX Traction Kit bundles are specifically designed to work with the Galaxy TTET300 and TTET400 four-section Hi-Lo Traction Tables and assume that table setup is already in place.

Most clinical protocols run 10 to 20 minutes per session, though this varies by condition and provider recommendation. Intermittent traction cycles, where the unit alternates between pull and release phases, are common on programmable units like the TX Traction Unit. Home devices like the HomeTrac are typically used for similar durations, following a schedule set by the user's physical therapist.

The TX Traction Kit bundles include the TX Unit, Quickwrap Belt, Saunders Cervical harness, and stool in a single kit, so all components arrive together. Clinics will still need to connect and configure the TX Unit to their existing Galaxy traction table. The setup process is straightforward but does assume familiarity with the traction table interface or access to Chattanooga's setup documentation.

Warranty terms are set by Chattanooga and Saunders individually and vary by product. Clinical equipment like the TX Traction Unit typically carries manufacturer warranty coverage for parts and workmanship. For specific warranty periods applicable to the exact model you are purchasing, refer to the individual product page or contact Peak Primal Wellness directly before purchase.

No, cervical traction is not appropriate for everyone. People with spinal instability, certain fractures, rheumatoid arthritis affecting the cervical spine, or acute inflammatory conditions should avoid traction until cleared by a physician. Even for appropriate candidates, starting with lower force levels and building gradually is the standard approach. These devices are most effective when used within a guided rehab program rather than independently without oversight.